Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Search results for 'lap cat'

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2

List  Grid 

  1. GSX338v2 Sport 20/ P-FE Hydroplane Kit

    GSX338v2 Sport 20/ P-FE Hydroplane Kit

    Welcome to the future of Sport Hydroplane racing. The all new ML Boatworks GSX338v2 Sport 20/ P-FE Hydroplane is one impressive machine. After many months of design this larger version sport 20 hull is complete. This particular size GSX is designed around the FE market, with no current plans to offer this one as a nitro version as the GSX315v2 will handle your Nitro needs. This hull is designed to handle the larger Full- P FE power on the market. Who else other than ML Boatworks would you expect this kind of size flexibility?
    The final product left no stone un-turned, and the way this boat runs shows it paid off! This boat is ready to hit the race course and stake its claim. This boat is fast and stable not only in calm water, but also in rough and windy conditions. With this 33.8" hydroplane- just pull the trigger, hold it wide open!

    The V2 advantage. Released 3/26/2018, this new Version 2 model has a few updates that will make a great hull, even better. The first change was both sponsons were widened from top, to bottom. This width change, will not only add stability in the turns under high power, but it adds a wider ride pad for better hull flotation for heavy battery setups while the hull is sitting dead still in the water. With a wider ride pad, comes more surface area. This surface area can scrub speed potential...but, we have a fix for that. The new ride surface is now a shingled sponson, which will create better air turbulence under the ride pad, and keep the hull free from the water at speed. These changes make a great design, even better. No photos are uploaded yet of these changes, but will be shown when available.

    A few options, and features of the GSX338v2:

    This hull uses new Truss Frame Technology, or TFT, available no where else but ML Boatworks. What is TFT you ask? It is an aircraft ply-lite ply-aircraft ply truss system, allowing the inner "forward to aft" structural frames to be widened out to around 6.5" vs. the competitions 4" opening, while increasing overall rigidity . This extra width allows for access behind the 4" wide, 1/4" thick built-in engine rails WITHOUT the need to remove the deck sheeting. This means no need to stress about mounting your motor in the wrong position and not being able to access blind nuts after your model is built. It means a wider radio box area, and also more usable transom width to push the rudder over an inch wider to the right (starboard side) getting it even more in line with the turn fin. Locating the rudder this far over increases stability in the turns around a race course, and stabilizes emergency left hand turning. These benefits will astound builders who have dealt with 4" openings in the past.

    With all the above features, you might say WOW...But not yet. This kit also has a specific layout for the FE racer. The center section has the cross member frames and engine rails located to the optimal location to properly fit your bulky lipo packs/ motor required to power this platform. This makes the boat perfectly fit your needs! NO one else in the industry does it like this...Neither wood kits, nor prebuilt fiberglass hulls...The GSX338v2 is the only one! Congratulate yourself, you just found Innovation at its finest!

    With its rock solid platform, you will be able to harness all the available power from your wildest 4s FE power plants. This boat is sized properly for the IMPBA and NAMBA P-FE Sport 20 hydroplane classes. Available as a complete kit with all wood frames, outside sheeting, and basswood sticks.

    An optional canopy laid up in White Gel Coated fiberglass is also available:

    A pdf instruction manual and build pictures are available upon request.

    Learn More
    $150.00
    New
  2. STV River Rocket Catamaran fiberglass hull

    STV River Rocket Catamaran fiberglass hull

    This is the ML Boatworks STV River Rocket racing catamaran. This 40" cat can handle a variety of power choices (gas, nitro or FE), inboard or outboard, and is available in a wide variety of colors, including metal flake.

    Included items and Options:
    -Fiberglass or Carbon Fiber Layup
    -Solid White gel coat, or Metal Flake top, or Metal Flake top and bottom. (Buyer needs to talk to ML Boatworks about what color flake you would like. We have over 40 colors)
    -Upper and Lower deck is trimmed and bonded.

    Like ML Boatworks other fiberglass or wood products, this hull is built to order, and you may be on a build list. If this is a problem, we suggest contacting ML Boatworks before ordering to verify time frame! We want your hull built to suit YOU!

    This hull is 40"L

    Learn More
    $250.00
    New
  3. Amps Formula 357 SR1 54" Fiberglass or Carbon hull

    Amps Formula 357 SR1 54" Fiberglass or Carbon hull

    Working directly with Amps/ International Hobbies, ML Boatworks is happy to present a reproduction of the 54" long Amps Formula 357 SR1 Offshore Sport Cruiser hull! This boat is an American 80's classic. A beautiful representation of the Formula 357 SR1 flagship hull that was produced in the 80's-90's. This boat runs with the same look of the full size version! Amps-International Hobbies got this one right!

    Included items and Options:
    -A white gel coated, fiberglass layup is standard. An optional white gel coated, carbon fiber lay is also available.
    -Tinted lexan windshield is optional.
    -Upper and Lower deck is trimmed and bonded. Hatch is trimmed to fit.


    This hull is designed to run as an inboard hull.
    -An original pair of Amps gear driven outdrives will replicate the way this boat original was sold by Amps. Our personal test boat ran a single MHZ Z-drive, and handled great, and proved to be a very reliable setup. A strut system can also be used.
    Like ML Boatworks other fiberglass or wood products, this hull is built to order. Build time will be anywhere between 2-3 weeks.

    This hull is 54"L x 12.5"W .

    Learn More
    $280.00
    New
  4. Amps Trihull Daycruiser Outboard Fiberglass hull

    Amps Trihull Daycruiser Outboard Fiberglass hull

    Working directly with Amps/ International Hobbies, ML Boatworks is happy to present a reproduction of the 34" long Amps Trihull Daycruiser Outboard hull! This boat is an American 70's classic. This boat has often been called the "Everyman's ski boat". And rightly so, every middle class american in this time period more than likely owned one of these.

    Please see the "Details" below, and carefully choose your order options in the drop down menus! Learn More

    $240.00
    New
  5. Zippkits Envy Gas Outrigger Stand ENVY

    Zippkits Envy Gas Outrigger Stand ENVY

    ML Boatworks ENVY stand is a custom outrigger stand designed to fit the Zippkits Envy Gas Outrigger hull. Offering support for the front and rear booms, and two locations along the tub, it was perfectly designed for your Envy!

    This kit includes all 1/4" birch plywood needed to build your stand. 3/4" Dowel rod is required to complete the build, and can be found at any local hardware store. Learn More
    New
  6. RSX310 Outrigger Stand- RSX-310S

    RSX310 Outrigger Stand- RSX-310S

    ML Boatworks RSX-310S stand is a custom outrigger stand designed to fit the ML Boatworks RSX310 hull. Offering support for the front and rear booms, one location along the tub and a propeller guard, it was perfectly designed for your 310!

    This kit includes all 1/4" birch plywood needed to build your stand. 3/4" Dowel rod is required to complete the build, and can be found at any local hardware store. Learn More
    $42.00
    New
  7. Amps BAJA Outboard or Inboard Fiberglass hull

    Amps BAJA Outboard or Inboard Fiberglass hull

    Working directly with Amps/ International Hobbies, ML Boatworks is happy to present a reproduction of the 38" long Amps Baja Vee bottom Outboard or Inboard/Outboard hull!

    Please see the "Details" below, and carefully choose your order options in the drop down menus! Learn More

  8. GSX310/ GSX315v2 "Nitro/FE" Long Style Cowling

    GSX310/ GSX315v2 "Nitro/FE" Long Style Cowling

    Replacement white gel coated fiberglass GSX310/ GSX315v2 "Nitro/FE" Long style cowling.

    Product Fits: GSX310 and GSX315v2 Sport 20 hydros utilizing the full center section length. Used for nitro and FE applications

    Includes: (1)- Unpainted, untrimmed white gel coated fiberglass cowling. Learn More
    $45.00
  9. 1/10th Scale Hydroplane Trailer by Don Ferrette

    1/10th Scale Hydroplane Trailer by Don Ferrette

    The new 1/10th scale Hydroplane Trailer kit. This kit is designed off of Don Ferrette's custom trailer. He gave ML Boatworks exclusive rights to produce this awesome scale replication! This uses all 1/16", 1/8" and 1/4" aircraft plywood for construction, as well as 1/4" x 1/4" Basswood sticks. Complete wood kit is included. Wheels, Tires, and Axles sold separately. Photo of finished trailer shows the prototype trailer. Actual finished kit will vary in construction technique and materials. Learn More
    $135.00
  10. 1/8th Scale Hydroplane Trailer by Don Ferrette

    1/8th Scale Hydroplane Trailer by Don Ferrette

    The new 1/8th scale Hydroplane Trailer kit. This kit is designed off of Don Ferrette's custom trailer. He gave ML Boatworks exclusive rights to produce this awesome scale replication! This uses all 1/16", 1/8" and 1/4" aircraft plywood for construction, as well as 1/4" x 1/4" Basswood sticks. Complete wood kit is included. Wheels, Tires, and Axles sold separately. Photo of finished trailer shows the prototype trailer. Actual finished kit will vary in construction technique and materials. Learn More
    $155.00

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2

List  Grid