Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Search results for 'wild thing'

8 Item(s)

List  Grid 

  1. GSX338v2 Sport 20/ P-FE Hydroplane Kit

    GSX338v2 Sport 20/ P-FE Hydroplane Kit

    Welcome to the future of Sport Hydroplane racing. The all new ML Boatworks GSX338v2 Sport 20/ P-FE Hydroplane is one impressive machine. After many months of design this larger version sport 20 hull is complete. This particular size GSX is designed around the FE market, with no current plans to offer this one as a nitro version as the GSX315v2 will handle your Nitro needs. This hull is designed to handle the larger Full- P FE power on the market. Who else other than ML Boatworks would you expect this kind of size flexibility?
    The final product left no stone un-turned, and the way this boat runs shows it paid off! This boat is ready to hit the race course and stake its claim. This boat is fast and stable not only in calm water, but also in rough and windy conditions. With this 33.8" hydroplane- just pull the trigger, hold it wide open!

    The V2 advantage. Released 3/26/2018, this new Version 2 model has a few updates that will make a great hull, even better. The first change was both sponsons were widened from top, to bottom. This width change, will not only add stability in the turns under high power, but it adds a wider ride pad for better hull flotation for heavy battery setups while the hull is sitting dead still in the water. With a wider ride pad, comes more surface area. This surface area can scrub speed potential...but, we have a fix for that. The new ride surface is now a shingled sponson, which will create better air turbulence under the ride pad, and keep the hull free from the water at speed. These changes make a great design, even better. No photos are uploaded yet of these changes, but will be shown when available.

    A few options, and features of the GSX338v2:

    This hull uses new Truss Frame Technology, or TFT, available no where else but ML Boatworks. What is TFT you ask? It is an aircraft ply-lite ply-aircraft ply truss system, allowing the inner "forward to aft" structural frames to be widened out to around 6.5" vs. the competitions 4" opening, while increasing overall rigidity . This extra width allows for access behind the 4" wide, 1/4" thick built-in engine rails WITHOUT the need to remove the deck sheeting. This means no need to stress about mounting your motor in the wrong position and not being able to access blind nuts after your model is built. It means a wider radio box area, and also more usable transom width to push the rudder over an inch wider to the right (starboard side) getting it even more in line with the turn fin. Locating the rudder this far over increases stability in the turns around a race course, and stabilizes emergency left hand turning. These benefits will astound builders who have dealt with 4" openings in the past.

    With all the above features, you might say WOW...But not yet. This kit also has a specific layout for the FE racer. The center section has the cross member frames and engine rails located to the optimal location to properly fit your bulky lipo packs/ motor required to power this platform. This makes the boat perfectly fit your needs! NO one else in the industry does it like this...Neither wood kits, nor prebuilt fiberglass hulls...The GSX338v2 is the only one! Congratulate yourself, you just found Innovation at its finest!

    With its rock solid platform, you will be able to harness all the available power from your wildest 4s FE power plants. This boat is sized properly for the IMPBA and NAMBA P-FE Sport 20 hydroplane classes. Available as a complete kit with all wood frames, outside sheeting, and basswood sticks.

    An optional canopy laid up in White Gel Coated fiberglass is also available:

    A pdf instruction manual and build pictures are available upon request.

    Learn More
    $150.00
    New
  2. 1/8th Scale Newton 131/ MHR 5454 Kit

    1/8th Scale Newton 131/ MHR 5454 Kit

    This kit makes the following boats and possibly more that are not listed. The 100 series number matches the Newton Marine numbering. The 4 digit number matches the NAMBA Master Hull Roster.

    1) 131-A, 5454 '54 GALE IV U-54
    2) 131-B, 5455 '55 GALE V U-55
    3) 131-C, 5455 '58 Wildroot Charlie U-54
    4) 131-D, 5454 '60 Miss Everett U-02
    5) 131-E, 5454 '61 Cutie Radio U-1230-910
    6) 131-F, 5454 '62 Miss B & I U-02
    7) 131-G, 5454 '63 U-Owe-Too U-02
    8) 131-H, 5655 '59 Yellow Jacket U-81
    9) 131-I, 5513 '55 Tempo VII U-13
    10) 131-J, 5513 '57 Short Circuit U-99
    11) 131-K, 5513 '58 Miss Detroit U-99
    12) 131-L, 5513 '62 Miss D.C. U-8
    13) 131-M, 5513 '63 St. Regis U-8
    14) 131-N, 5509 '55 Hawaii Kai U-9


    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $118.00
    New
  3. 1/8th Scale Newton 110/ MHR 6925 Extreme Kit

    1/8th Scale Newton 110/ MHR 6925 Extreme Kit

    This kit makes the following boats and possibly more that are not listed. The 100 series number matches the Newton Marine numbering. The 4 digit number matches the NAMBA Master Hull Roster.

    1) 110-A, 6925, '69 Pay N Pak Rigger U-25


    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $175.00
    New
  4. Wild Thing 45" Gas Mono kit by John Finch

    Wild Thing 45" Gas Mono kit by John Finch

    The John Finch "Wild Thing" 45" deep vee mono hull in Gas form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes all needed wood materials to complete the build.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $170.00
  5. Wild Thing 36" Q FE Mono kit by John Finch

    Wild Thing 36" Q FE Mono kit by John Finch

    The John Finch "Wild Thing" 36" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process. John's initial test of this kit on 6s lipo radar-ed 70mph in heat race trim...with 15mph winds and white caps!

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $155.00
  6. Wild Thing 34" P FE Mono kit by John Finch

    Wild Thing 34" P FE Mono kit by John Finch

    The John Finch "Wild Thing" 34" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $145.00
  7. Wild Thing 32" P-Ltd FE Mono kit by John Finch

    Wild Thing 32" P-Ltd FE Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00
  8. Wild Thing 32" Nitro Mono kit by John Finch

    Wild Thing 32" Nitro Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00

8 Item(s)

List  Grid