Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Wood RC Race Boat Kits

Wood RC Race Boat Kits

MLBOATWORKS LASER CUT FRAMING KITS. As I have stated many times, To build the best, you have to start with the best. Well, you are here. With the help of Newton Marine and some of the most knowledgeable racers in the country, ML Boatworks laser cut wood framing kits are the foundation you need to build a highly competitive and/ or detailed rc boat kit. With over 160 Scale Hydroplane, Sport Hydroplane, Mono, Kneeler O/B Hydroplane, O/B Tunnel framing kits you have many choices available to fit your pleasure boating or racing needs. These kits have been drawn on CAD; correcting fitment and incorporate features such as toy tabs to stabilize the kit during the build, adjusted break points in pan, adjusted sponson AoA & dihedral, added belly pans to lower engines or make room for FE setups and laser etched numbering makes frame up a cinch. All of these features make for a beautiful laser cut framing kit that almost builds itself! Please review our available kit list under each tab. ML Boatworks is constantly expanding the available kit list. If you do not see a kit you need, please ask so we can satisfy your needs. Custom sizes or variants of finished kits are available at an additional design cost. Please email or call for details. For those new to building wood frame-up boats, please call so we can assist you in making a decision on your first kit. We have a short list of kits that are great for beginners and will make your first build experience a successful one!

Items 1 to 10 of 118 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

  1. RSX240 FE Outrigger Hydroplane Kit

    RSX240 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX240 24" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the N Outrigger Hydroplane classes (2s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX240:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    $87.00
    New
  2. RSX310 FE Outrigger Hydroplane Kit

    RSX310 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX310 31" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the P-Limited or full P Outrigger Hydroplane classes (4s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX310:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    $100.00
    New
  3. RSX380 FE Outrigger Hydroplane Kit

    RSX380 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX380 38" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the Q FE Outrigger Hydroplane classes (6s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX310:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    $135.00
    New
  4. 1/10th Scale Newton 138/ MHR 8255 Extreme Kit

    1/10th Scale Newton 138/ MHR 8255 Extreme Kit

    This kit makes the following boats and possibly more that are not listed. The 100 series number matches the Newton Marine numbering. The 4 digit number matches the NAMBA Master Hull Roster.

    1) 138-A, 8255, ’82 Oh Boy! Oberto U-88
    2) 138-B, 8255, ‘82 Executone U-8
    3) 138-C, 8255, ’83 Miss Rock KISW U-40
    4) 138-D, 8255, ’83 Miss Houston U-40
    5) 138-E, 8255, ’83 American Speedy Printing U-40 (Blue/White)
    6) 138-F, 8255, ’83 American Speedy Printing U-40 (Red/Yellow)
    7) 138-G, 8255, ’84 Oh Boy! Oberto U-40
    8) 138-H, 8255, ’84 Team Velocity U-40
    9) 138-I, 8255, ’84 Risely’s Express U-40
    10) 138-J, 8255, ’85 Miss Rock U-100
    11) 138-K, 8255, ’85 Coors Light U-100
    12) 138-L, 8255, ’88 Pocketsavers Plus U-4
    13) 138-M, 8255, ’89 Pietro’s Pizza U-146

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $130.00
  5. GSX310 Sport 20/ P-FE Hydroplane Kit

    GSX310 Sport 20/ P-FE Hydroplane Kit

    Welcome to the future of Sport Hydroplane racing. The all new ML Boatworks GSX310 Sport 20/ P-FE Hydroplane is one..no, make that TWO impressive machines. After many months of design, two dedicated hull designs were complete...a nitro version, and an FE version. Specific platforms to fit your demands! Who else other than ML Boatworks would you expect this kind of flexibility?
    The final product left no stone un-turned, and the way this boat runs shows it paid off! This boat is ready to hit the race course and stake its claim. This boat is fast and stable not only in calm water, but also in rough and windy conditions. With this 31" hydroplane- just pull the trigger, hold it wide open!

    A few options, and features of the GSX310:

    This hull uses new Truss Frame Technology, or TFT, available no where else but ML Boatworks. What is TFT you ask? It is an aircraft ply-lite ply-aircraft ply truss system, allowing the inner "forward to aft" structural frames to be widened out to around 6.5" vs. the competitions 4" opening, while increasing overall rigidity . This extra width allows for access behind the 4" wide, 1/4" thick built-in engine rails WITHOUT the need to remove the deck sheeting. This means no need to stress about mounting your motor in the wrong position and not being able to access blind nuts after your model is built. It means a wider radio box area, and also more usable transom width to push the rudder over an inch wider to the right (starboard side) getting it even more in line with the turn fin. Locating the rudder this far over increases stability in the turns around a race course, and stabilizes emergency left hand turning. These benefits will astound builders who have dealt with 4" openings in the past.

    With all the above features, you might say WOW...But not yet. This kit also has the option of 2 different center sections; A nitro center, or the FE center. Each center section has the cross member frames and engine rails located to the optimal location to properly fit your nitro engine, or the bulky lipo packs/ motor required to power this platform. This makes the boat perfectly fit your needs! NO one else in the industry does it like this...Neither wood kits, nor prebuilt fiberglass hulls...The GSX310 is the only one! Congratulate yourself, you just found Innovation at its finest!

    With its rock solid platform, you will be able to harness all the available power from your wildest .21 Nitro or 4s FE power plants. This boat is sized properly for the IMPBA and NAMBA sport 20 hydroplane classes, and it also fits the P FE power classes. Available as a complete kit with all wood frames, outside sheeting, and basswood sticks.

    With two optional center sections, and the choice of a canopy laid up in White Gel Coated fiberglass:

    A pdf instruction manual and build pictures are available upon request.

    Learn More
    $145.00
    New
  6. Wild Thing 32" Nitro Mono kit by John Finch

    Wild Thing 32" Nitro Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00
  7. Wild Thing 32" P-Ltd FE Mono kit by John Finch

    Wild Thing 32" P-Ltd FE Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00
  8. Wild Thing 34" P FE Mono kit by John Finch

    Wild Thing 34" P FE Mono kit by John Finch

    The John Finch "Wild Thing" 34" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $145.00
  9. Wild Thing 36" Q FE Mono kit by John Finch

    Wild Thing 36" Q FE Mono kit by John Finch

    The John Finch "Wild Thing" 36" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process. John's initial test of this kit on 6s lipo radar-ed 70mph in heat race trim...with 15mph winds and white caps!

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $155.00
  10. Wild Thing 45" Gas Mono kit by John Finch

    Wild Thing 45" Gas Mono kit by John Finch

    The John Finch "Wild Thing" 45" deep vee mono hull in Gas form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes all needed wood materials to complete the build.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $170.00

Items 1 to 10 of 118 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid