Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Wood RC Race Boat Kits

Wood RC Race Boat Kits

MLBOATWORKS LASER CUT FRAMING KITS. As I have stated many times, To build the best, you have to start with the best. Well, you are here. With the help of Newton Marine and some of the most knowledgeable racers in the country, ML Boatworks laser cut wood framing kits are the foundation you need to build a highly competitive and/ or detailed rc boat kit. With over 160 Scale Hydroplane, Sport Hydroplane, Mono, Kneeler O/B Hydroplane, O/B Tunnel framing kits you have many choices available to fit your pleasure boating or racing needs. These kits have been drawn on CAD; correcting fitment and incorporate features such as toy tabs to stabilize the kit during the build, adjusted break points in pan, adjusted sponson AoA & dihedral, added belly pans to lower engines or make room for FE setups and laser etched numbering makes frame up a cinch. All of these features make for a beautiful laser cut framing kit that almost builds itself! Please review our available kit list under each tab. ML Boatworks is constantly expanding the available kit list. If you do not see a kit you need, please ask so we can satisfy your needs. Custom sizes or variants of finished kits are available at an additional design cost. Please email or call for details. For those new to building wood frame-up boats, please call so we can assist you in making a decision on your first kit. We have a short list of kits that are great for beginners and will make your first build experience a successful one!

Items 1 to 10 of 111 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

  1. 1/6.66th Gas Scale Newton 157/ MHR 8910 Kit

    1/6.66th Gas Scale Newton 157/ MHR 8910 Kit

    This kit makes the following boats and possibly more that are not listed. The 100 series number matches the Newton Marine numbering. The 4 digit number matches the NAMBA Master Hull Roster.

    1) 157-A, 8910, ’89 Winston Eagle Lobster U-10

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $160.00
  2. RSX310 FE Outrigger Hydroplane Kit

    RSX310 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX310 31" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the P-Limited or full P Outrigger Hydroplane classes (4s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX310:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    New
  3. RSX380 FE Outrigger Hydroplane Kit

    RSX380 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX380 38" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the Q FE Outrigger Hydroplane classes (6s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX310:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    $135.00
    New
  4. RSX240 FE Outrigger Hydroplane Kit

    RSX240 FE Outrigger Hydroplane Kit

    The all new ML Boatworks RSX240 24" FE Outrigger Hydroplane has finally arrived. ML Boatworks has toyed with the idea of introducing an outrigger into their stable for many years...well, the design, build, and testing is now completed, and we really like what we saw out on the water! This boat should be extremely competitive in the N Outrigger Hydroplane classes (2s Lipo) as it can handle not only high end speeds will stability, on a rail type cornering, but it can also get you through the rough water we typically see on the race course.

    A few options, and features of the RSX240:
    *Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. *An optional canopy laid up in White Gel Coated fiberglass.
    A pdf instruction manual and build pictures are available upon request. (Coming soon, build thread on www.intlwaters.com, and www.offshoreelectrics.com)

    Learn More
    $87.00
    New
  5. GP335v2 Sport 20/ Full P FE Hydroplane Kit

    GP335v2 Sport 20/ Full P FE Hydroplane Kit

    With 4 years under its belt, the GP series has set it's mark as a proven winner in the racing field, and an absolute blast for sport running. The ML Boatworks GP335v2 Sport 20/ Full-P FE Hydroplane is one of a special set of sport hydroplane hulls. With many months of thought and input from top racers around the country, this boat lineup is pure bread. Extremely fast and stable as a Full-P FE or Sport 20 Nitro race boat. With this 33.5" hydroplane- just pull the trigger, hold it wide open, and hang on! With its rock solid platform, you will be able to harness all the available power from a Full-P motor, or the wildest sport 20 Nitro setup. Current testing of this hull has shown complete stability at heat racing speeds in the 60-65mph range.

    Includes:

    *This kit is complete with all internal plywood framing, outside plywood sheeting, and basswood sticks.
    *An optional white gel coated fiberglass GP (Turbine style) cowling with extra room for Nitro platforms, or an FE Prototype (flat top style) cowling are available.
    *A pdf instruction manual is available upon request.

    Learn More
    $135.00
  6. GP265v2 Sport 12/ N FE Hydroplane Kit

    GP265v2 Sport 12/ N FE Hydroplane Kit

    With 4 years under its belt, the GP series has set it's mark as a proven winner in the racing field, and an absolute blast for sport running. The ML Boatworks GP265v2 Sport 12/ N-FE Hydroplane is one of a special set of sport hydroplane hulls. With many months of thought and input from top racers around the country, this boat lineup is pure bread. Extremely fast and stable as a N powered FE or Sport .12 Nitro race boat. With this 26.5" hydroplane- just pull the trigger, hold it wide open, and hang on! Includes:

    *This kit is complete with all internal plywood framing, outside plywood sheeting, and basswood sticks.
    *An optional white gel coated fiberglass GP (bubble style) cowling with extra room for Nitro platforms, or an FE Prototype (flat top style) cowling are available.
    *A pdf instruction manual is available upon request.

    Learn More
    $105.00
  7. GSX480 Gas Sport Hydroplane Kit w/ cowling

    GSX480 Gas Sport Hydroplane Kit w/ cowling

    Welcome to the future of GAS Sport Hydroplane racing. The all new ML Boatworks GSX480 Gas Sport Hydroplane is one impressive machine. With over a year on the design table, we talked to top racers around the world and listened to their needs. The final product left no stone unturned, and the way this boat runs shows it paid off! This boat is ready to hit the race course and stake its claim. This boat is fast and stable not only in calm water, but also in rough and windy conditions. With this 48" hydroplane- just pull the trigger, hold it wide open!

    This hull also uses new Truss Frame Technology, or TFT, available no where else but ML Boatworks. What is TFT you ask? It is an aircraft ply-lite ply-aircraft ply truss system, allowing the inner "forward to aft" structural frames to be widened out to around 7.5" while increasing overall integrity vs. the competitions 5" opening. This extra width allows for access behind the 5" built-in engine rails WITHOUT the need to remove the deck sheeting. This means no need to stress about mounting your motor in the wrong position and not being able to access blind nuts after your model is built. It also means more room for the carb and tuned pipe, a wider radio box area, and also more usable transom width to push the rudder over an inch wider to the right getting it even more in line with the turn fin. Locating the rudder this far other increases stability in the turns around a race course, and stabilizes emergency left hand turning. These benefits will astound builders who have dealt with 5" openings in the past.

    With its rock solid platform, you will be able to harness all the available power from your wildest 26-36cc gas engine. This boat is sized properly for the IMPBA and NAMBA gas sport hydroplane classes, and it also fits the S and T FE power glasses for sport hydroplane (FE cowling available soon). Available as a complete kit with all wood frames, outside sheeting, and basswood sticks. A white gel coated fiberglass cowling is now included standard! A pdf instruction manual is available upon request.



    Learn More
    $250.00
  8. Wild Thing 32" Nitro Mono kit by John Finch

    Wild Thing 32" Nitro Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00
  9. Wild Thing 32" P-Ltd FE Mono kit by John Finch

    Wild Thing 32" P-Ltd FE Mono kit by John Finch

    The John Finch "Wild Thing" 32" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $135.00
  10. Wild Thing 34" P FE Mono kit by John Finch

    Wild Thing 34" P FE Mono kit by John Finch

    The John Finch "Wild Thing" 34" deep vee mono hull in FE form is now available as a laser cut kit! With permission from Mr. Finch, ML Boatworks has done all the CAD work to convert this excellent, record setting hull into an easy build kit. This kit also includes a build jig to help hold all the frames square during the build process.

    ***FOR COMPLETE KIT INFORMATION AND MATERIAL REQUIREMENTS, PLEASE SEE "DETAILS" SECTION BELOW***

    Learn More
    $145.00

Items 1 to 10 of 111 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid